THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE. THE ENTIRE RISK AS TO USE, RESULTS AND
PERFORMANCE OF THE PACKAGE IS ASSUMED BY YOU AND IF THE PACKAGE SHOULD PROVE
TO BE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING,
REPAIR OR OTHER REMEDIATION.
UNDER NO CIRCUMSTANCES, CAN THE AUTHOR BE HELD RESPONSIBLE FOR ANY DAMAGE
CAUSED IN ANY USUAL, SPECIAL, OR ACCIDENTAL WAY, ALSO IF THE OWNER OR A THIRD
PARTY HAS BEEN POINTED AT SUCH POSSIBILITIES OF DAMAGE.
This install applies to "Copper Slave" © 1992 Ram Jam.
Requirements:
-------------
This install requires WHDLoad to be in the path.
It can be found in the WHDLoad package.
To install from a different drive than DF0: select installation mode Expert.
The installed demo requires 0.5 MB ChipMem (+0.2 MB for preload).
It can be quit by pressing F10 (key can be changed with Tooltype "QuitKey=").
Features:
---------
- Full load from HD
- Decruncher (Mega Cruncher 1.0) relocated to fast memory
- Access fault fixed (write to $dff0144 and other non-existent registers)
- Interrupt fixed
- NewIcon (created by me)
- Source code included as usual
- Quit option that works on 68000 machines (default key is 'F10')
Always liked this demo, nice copper bar effects here. Simple to code
but good looking effects. Code had only one major problem, due to
a typo there were writes to non-existent hardware registers, coder
wrote to $dff0144 instead of $dff144, same problem for several other
registers. Other than that there wasn't much to fix.
The demo can be downloaded here:
ftp://ftp.amigascne.org/pub/amiga/Groups/R/Ram_Jam/RAMJAM-CopperSlave
Enjoy the demo from HD.
Sting, 04-Oct-2013
Greetings to all in Scarab and Scoopex, the WHDLoad team, PMC,
Musashi5150, Skan, Slummy, Loaderror, Frequent, Wayne Kerr, Mr.Spiv,
Alpha One, CFou!, Paradroid and all the other usual suspects. :)
Special greetings to all Golf MK1 fans worldwide except those
lowlifes who "borrowed" my MK1 for a joyride!
Extra greetings to the usual suspects on #amigascne, see you all at
Revision 2014! :)
History:
--------
version 1.00 (04.10.2013) done by StingRay:
- initial release
- source code included
Contact:
--------
If you have problems with this installation please try and get a newer
version of this package from the WHDLoad WWW-Page. If that doesn't help try
some Tooltypes like NOCACHE, NOAUTOVEC, EXPCHIP, NOMMU, PAL or NTSC. If
that also fails, please inform the author via the Bug-Report-Form which
can be accessed on the WHDLoad WWW-Page.
For the full WHDLoad package, other installs and updates refer to:
http://www.whdload.de/
or aminet:dev/misc/whdload#?
and aminet:game/patch/ |
