THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE. THE ENTIRE RISK AS TO USE, RESULTS AND
PERFORMANCE OF THE PACKAGE IS ASSUMED BY YOU AND IF THE PACKAGE SHOULD PROVE
TO BE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING,
REPAIR OR OTHER REMEDIATION.
UNDER NO CIRCUMSTANCES, CAN THE AUTHOR BE HELD RESPONSIBLE FOR ANY DAMAGE
CAUSED IN ANY USUAL, SPECIAL, OR ACCIDENTAL WAY, ALSO IF THE OWNER OR A THIRD
PARTY HAS BEEN POINTED AT SUCH POSSIBILITIES OF DAMAGE.
This install applies to "Bubonic Plague" © 1989 Bloodsuckers.
This install requires WHDLoad to be in the path.
To install from a different drive than DF0: select installation mode Expert.
The installed demo requires 0.5 MB ChipMem (+0.2 MB OtherMem for preload).
It can be quit by pressing F10 (key can be changed with Tooltype "QuitKey=").
- Full load from HD
- Self-modifying code fixed
- Blitter waits added (x25, 68010+ only)
- Blitter waits can be forced on 68000 machines with CUSTOM1
- Bplcon0 color bit fixes (x4)
- Interrupt fixed
- NewIcon (created by me)
- Source code included as usual
- Quit option that works on 68000 machines (default key is 'F10')
Nice demo with quite good and optimised code, it needs a while
to get started so let it run a while.
Since the code is quite optimised, adding a few of the blitter wait
patches was quite tricky. The blitter wait patches are only enabled
on machines with a 68010+ CPU, on 68000 machines you can force
the blitter waits with CUSTOM1=1.
If you want to save some HD space you can pack the "BubonicPlague" file
with any cruncher supported by WHDLoad (FImp, Propack etc.).
Enjoy the demo from HD.
Greetings to all in Scarab and Scoopex, the WHDLoad team, PMC,
Musashi5150, Skan, Slummy, Loaderror, Frequent, Wayne Kerr, Mr.Spiv,
Alpha One, CFou!, Paradroid, Audiomonster, Bonefish, Vention,
Slammer, Axis, Tim, Triace, Britelite and all the other usual suspects. :)
Special greetings to all Golf MK1 fans worldwide and all classic
car owners/drivers. :)
Extra greetings to the usual suspects on #amigascne, see you all at
Revision 2016! :)
version 1.00 (30.08.2015) done by StingRay:
- initial release
- source code included
If you have problems with this installation please try and get a newer
version of this package from the WHDLoad WWW-Page. If that doesn't help try
some Tooltypes like NOCACHE, NOAUTOVEC, EXPCHIP, NOMMU, PAL or NTSC. If
that also fails, please inform the author via the Bug-Report-Form which
can be accessed on the WHDLoad WWW-Page.
For the full WHDLoad package, other installs and updates refer to: